Kinetico reverses osmosis filters that last an average of two to three years depending on the quality of the water being filtered. Replacement filters are available which should be changed out regularly to ensure optimal performance. The frequency at which these filters should be replaced will depend on the amount of water being filtered and the quality of the incoming water supply. It is important to make sure that the system is regularly maintained and monitored, as well as ensure that any filters are changed out when needed. This ensures that your Kinetico reverse osmosis system will provide you with clean and healthy water for years to come. Additionally, purchasing a quality filter can help extend the life of your filters, as well as improve the overall performance of your system.
How Long Do Kinetico Reverse Osmosis Filters Last?
Kinetico reverse osmosis (RO) filters are designed to be long-lasting and provide superior filtration. Depending on the water quality in your area, Kinetico RO filters can last anywhere from six months to two years before you need to replace them.
When Is the Right Time to Replace Your Kinetico Filters?
The lifespan of a reverse osmosis system’s filters will depend on how often the system is used and the water quality in your area. Generally, Kinetico recommends replacing the sediment and carbon pre-filters every 12 months. The semi-permeable membrane should be replaced every 3 to 5 years, while the post-carbon filter should be swapped out every 6 to 12 months.
How To Know Kinetico Filter Needs Replacement?
Routinely check the PureMometer: Kinetico’s SmartPak filter replacement indicator monitors the life of your filters and indicates when it’s time for a replacement.
Pay attention to the water flow: When it slows down or stops, this is a sign that your filter needs to be replaced. This will usually occur after about two years of use. Regular maintenance and cleaning of the reverse osmosis filters can extend their lifespan significantly. If you notice any changes in the quality of water over time, check in with the manufacturer for regular maintenance or replacement instructions.
Water usage: Depending on how much water is being used with the reverse osmosis system, it may be necessary to change out pre-filters more often. The frequency of these changes will depend on the amount of sediment, chlorine and other particles that are found in your tap water.
Quality of water: The quality of water from Kinetico reverse osmosis filters is excellent. This system produces high-quality, clean drinking water that’s free of impurities and contaminants. It also removes up to 99% of dissolved solids in your tap water. Plus, the filters have an extra layer of protection against bacteria, viruses, and other microbes. This ensures that you and your family have access to safe drinking water.
What Are the Components Of Kinetico Reverse Osmosis Filters
Kinetico reverses osmosis filters are composed of several components:
1. Pre-filter – this removes large particles such as sediment, dirt, and debris from the water before it passes through the RO membrane.
2. Carbon filter – this eliminates chlorine, pesticides, and other contaminants that could damage the RO membrane or reduce its effectiveness.
3. Reverse osmosis membrane – this is a thin film that allows only water molecules to pass through and filters out dissolved solids, bacteria, viruses, and other contaminants from the water supply.
4. Post-filter – this removes any remaining particles or contaminants from the filtered water before it reaches the faucet.
5. Storage tank – this is where the filtered water is stored until it’s ready to be used.
6. Faucet/tap – this is where the filtered water comes out when you turn on the faucet.
How Do Kinetico Reverse Osmosis Filters Work?
Kinetico reverse osmosis (RO) filters use a semi-permeable membrane to remove particles and impurities from drinking water. The membrane has tiny holes, allowing only pure water molecules through and rejecting larger molecules such as salts, minerals, and other contaminants. The contaminants are washed away and stored in a reject tank for easy disposal. The filtered water is then routed to a storage tank for future use.
Why Does The Water Flow From My Kinetico Reverse Osmosis Slow Down When The Filters Need To Be Changed?
When the filters in your Kinetico reverse osmosis system start to become clogged, the flow of water will slow down significantly. This is because the particles and contaminants that were once trapped by the filters are now passing through, which reduces water pressure and decreases the flow rate. The filters must be changed periodically to keep the reverse osmosis system running efficiently, so it’s important to be aware of when they need to be changed.
What Does The Kinetico MACguard/Post Filter Do That Makes It Need To Be Changed Every 500 Gallons?
The Kinetico MACguard/Post Filter is designed to provide additional filtration following the reverse osmosis process to ensure that your water tastes great and remains free of any potential contaminants. This filter media is designed to be more effective than standard carbon filters in trapping organic molecules, chlorine, pharmaceuticals, VOCs, bacteria and other contaminants. Over time, the filter media gets saturated with impurities and loses its ability to effectively remove these materials from your water. As a result, this filter needs to be changed every 500 gallons or once every 6 months, whichever comes first.
How Does The Kinetico MACguard/Post Filter Know That It Has Filtered 500 Gallons Of Water?
The Kinetico MACguard/Post Filter uses a 500-gallon capacity internal polypropylene sediment filter along with an integrated multi-stage carbon block filter. Its patented design includes a built-in flow sensor that monitors the amount of water which passes through the unit and shuts off the filtration process when 500 gallons have passed through the filter. A red indicator will light up when it is time to change the filter cartridge. This helps ensure that you get the maximum life out of your reverse osmosis filters, and provides peace of mind knowing that you are drinking clean, pure water. It’s easy to replace the filter cartridge with another one from Kinetico and you can be sure that your reverse osmosis system will continue to provide top-quality water.
Do I Need To Change Both The MACguard/Post And The Pre-Filter Every 500 Gallons?
Kinetico reverses osmosis filters are made of high-quality materials and designed to last for 500 gallons. In most cases, you only need to change the pre-filter and MACguard/post-filter every 500 gallons. This is because the membrane typically lasts longer than the other components. But if it’s been more than two years since you last changed the filter, it’s recommended that you change the whole system to ensure optimal performance. Additionally, if you notice an increase in impurities or a decrease in water pressure and flow rate, it may be time to replace the entire system.
FAQs
Can I change Kinetico filters myself?
Yes, you can easily change Kinetico reverse osmosis filters yourself. The filter process is straightforward, taking just minutes to complete. All the necessary tools and instructions for changing your filters are included with every purchase of a Kinetico reverse osmosis system.
What happens if I don’t replace filters in time?
If you don’t replace your Kinetico reverse osmosis filters in time, the filter may become clogged and unable to properly remove impurities. As a result, water quality could suffer; taste, odour, or chemical contaminants may enter your drinking water supply and eventually cause health problems.
How to tell if the filters are way past their expiration?
Kinetico reverses osmosis filters should be replaced every 18-24 months depending on your water usage and quality. Signs that the filters have expired include reduced water pressure, decreased flow rate, and a change in the taste or smell of the water. If you notice any of these indicators, it’s time to replace your reverse osmosis filters. To ensure the best performance of your filter, it’s important to regularly change them out so that you can get optimal water quality.
Do I Need To Have A Kinetico Service Person Change My Reverse Osmosis Filters?
No, you do not need to hire a Kinetico service person to change your reverse osmosis filters. If you have a standard three-stage system, the filter replacement process is straightforward and can be done by most people. Depending on your household water usage, the filters in a Kinetico reverse osmosis system should last an average of two to three years before needing to be replaced.
Conclusion
Overall, Kinetico reverses osmosis filters that last an average of 2-3 years with proper maintenance. However, it is important to replace the filter cartridges regularly to ensure optimal performance and taste quality of your water. Additionally, you should have a qualified technician inspect and service your system annually to help extend its lifespan. By following these simple steps, you can trust your Kinetico reverse osmosis system to provide you with clean, safe drinking water for years to come.
Meet Jeffrey B Roberts, your dedicated guide into the realm of water science and technology. As a hydro biologist with an insatiable curiosity, Jeffrey’s journey has been one of unraveling the mysteries of water systems and advocating for clean, safe water for all.
With an academic background steeped in the sciences, Jeffrey’s passion lies at the crossroads of science, technology, and nature. A deep fascination with plants and genetics has not only enriched their understanding of aquatic ecosystems but has also propelled them into the world of water softening solutions.
Believing that clean water is a basic human right, Jeffrey’s writing transcends the technicalities, making the intricate world of water softening accessible to all. Through their blog, they ardently share insights, tips, and breakthroughs, empowering readers to make informed decisions about their water quality.
Beyond his role as a prolific writer, Jeffrey is a respected figure in the hydronics industry education. With years of hands-on experience, they serve as an adjunct professor, nurturing the next generation of experts at the Thaddeus Stevens College of Technology. His involvement on the Technical Advisory Board further cements their dedication to pushing the boundaries of innovation in water technology.