Replace your Brita Water Pitcher Filter every 40 gallons or about every 2 months. The electric indicator also tells you when it’s time to change the water filter. This number can vary depending on the quality of water in your area, so if you notice a decrease in filtration performance and taste before 40 gallons have passed, it’s best to change the filter sooner.
Types Of Brita Water Pitcher Filter
Brita Standard Filter (White): This filter should be replaced every 40 gallons or 2 months.
Brita Longlast Filter (Blue): This filter should be replaced every 120 gallons or 6 months.
Changing The Brita Water Pitcher Filter
Step 1. Soak your new filter in cold water for 15 minutes before inserting it into the pitcher. Soaking helps activate the carbon in the filter, which helps it trap contaminants more effectively.
Step 2. Remove the lid and remove the old filter pulling by easy grip handle. Discard it appropriately. Rinse off the pitcher, and water reservoir with tap water. Be careful about washing the lid as it has an electric indicator.
Step 3. Take your new filter and rinse it off with cold water for 15 seconds. Insert the new filter into its housing. Make sure to fit the notch of your Brita water pitcher snugly in the groove of its filter, and press firmly for a secure seal.
Step 4. Reset the indicator light by pressing the reset button for 2 seconds for the standard filter and 4 seconds for the elite filter.
Signs Of Replacing Brita Filter
- Decrease in filtration performance
- Low filter change indicator light
Why Replace Brita Filter?
- By replacing your Brita water filter regularly, you can ensure that your water tastes fresher and is free of any contaminants.
- Replacing a Brita filter also helps to reduce unpleasant odors from the water, as well as removes chlorine from drinking water.
- Having a fresh Brita filter allows for a greater volume of water to be filtered. This provides more clean and healthy drinking water per filter life cycle than if filters were not replaced regularly.
- Regularly replacing your Brita filter helps to reduce the cost of purchasing bottled water, which can be quite expensive over time.
- It helps to maintain the life of your Brita water pitcher, as it avoids any buildup and clogging that could occur if the filter is not changed regularly.
- Leaving an old filter in your pitcher for an extended period of time could cause bacteria to build up within the pitcher itself, leading to potential health risks associated with drinking contaminated water.
Benefits Of Brita Water Pitcher Filters
- Removes harmful contaminants like chlorine, lead, mercury, and asbestos.
- Reduces sediment and particles for cleaner water.
- BPA-free filters are safe to use.
- Improves the taste of tap water without boiling or chemicals.
- Easy to install and change.
- An environmentally friendly option that reduces plastic bottle waste.
- Cost-effective solution.
- Helps maintain healthy hydration habits.
What Affects The Life Of A Brita Water Pitcher Filter?
The life of a Brita water pitcher filter is affected by the quality and quantity of water being filtered through it.
How Does The Brita Filter Replacement Indicator Work?
The Brita filter replacement indicator utilizes an LED light on the Brita pitcher and dispenser, which turns from green to red when your filter needs replacing.
Can Brita Water Filters Be Recycled?
Yes, Brita filters are recyclable. You can also look for recycling programs that accept Brita filters in your local area.
Can I Clean My Brita Filter Pitcher?
You can handwash your Brita filter pitcher with mild detergent and warm water, then rinse it thoroughly. Never use abrasive cleaners on your filter, as they can damage the carbon in the filter and reduce its effectiveness. A rinse is enough for your pitcher filters.
Is It Possible To Safely Employ Expired Brita Filters?
No, expired Brita filters are not safe to use. As the filter ages, it wears out and loses its efficacy in removing particles from your water. It can become a breeding ground for bacteria and other microorganisms that can make you sick if ingested.
Can I Use A Brita Filter In Hot Water?
Brita filters are not designed to be used in hot water. High temperatures can damage the carbon filter and reduce its effectiveness, so it’s best to avoid using it with water over 100°F (38°C).
What Type Of Contaminants Does The Brita Filter Reduce?
The Brita filter is designed to reduce common contaminants like chlorine and cysts from your drinking water. It can also help reduce sediment, heavy metals, and other particles that may be present in the water.
What Makes The Brita Elite Filter Last Longer Than Other Brita Filters?
The Brita Elite filter uses a pleated media filter that has a larger surface area to filter water.
What Is The Difference Between A Brita Filter And A Water Softener?
A Brita filter removes contaminants from drinking water, while a water softener removes minerals like magnesium and calcium from hard water.
It is important to regularly replace your Brita filter according to manufacturer instructions, which helps keep you and your family hydrated on a daily basis. No matter which type of Brita water pitcher and filter you’re using, it’s important to regularly check the filter and replace it when necessary in order to maintain optimal performance.
Meet Jeffrey B Roberts, your dedicated guide into the realm of water science and technology. As a hydro biologist with an insatiable curiosity, Jeffrey’s journey has been one of unraveling the mysteries of water systems and advocating for clean, safe water for all.
With an academic background steeped in the sciences, Jeffrey’s passion lies at the crossroads of science, technology, and nature. A deep fascination with plants and genetics has not only enriched their understanding of aquatic ecosystems but has also propelled them into the world of water softening solutions.
Believing that clean water is a basic human right, Jeffrey’s writing transcends the technicalities, making the intricate world of water softening accessible to all. Through their blog, they ardently share insights, tips, and breakthroughs, empowering readers to make informed decisions about their water quality.
Beyond his role as a prolific writer, Jeffrey is a respected figure in the hydronics industry education. With years of hands-on experience, they serve as an adjunct professor, nurturing the next generation of experts at the Thaddeus Stevens College of Technology. His involvement on the Technical Advisory Board further cements their dedication to pushing the boundaries of innovation in water technology.