The frequency of changing the pelican water softener will depend on the hardness of your water. If your water is low to moderately hard, you may only need to change it once a year. However, if your water is very hard or in an area with high iron content, you should change the filter cartridge more frequently, usually every 5 years. It’s also essential to monitor your system for the presence of dirt, sediment, or other particles, which may decrease its efficiency and require more frequent filter changes.
What Is Pelican Water Softener?
Pelican Water Softeners are designed to remove hard minerals from water and make it softer. This process helps reduce mineral buildup on fixtures and appliances, improve the taste of drinking water, and extend the life of your plumbing system. Pelican softeners also use less salt than traditional systems, making them a more environmentally friendly option.
How Often Should You Change The Pelican Water Softener?
It is recommended that you change the resin in your Pelican Water Softener every 3-5 years, depending on how complex the water is in your area. This can be determined by testing the water hardness with a test strip or a professional water analysis. A general rule is that if your water hardness exceeds 15 grains per gallon, you should recharge the softener more often. It is also a good idea to check for any damage or clogs in the system once a year.
How Does The Pelican Water Softener Works?
The Pelican Water Softener replaces the hard minerals found in water, such as calcium and magnesium, with softer sodium. This process is known as ion exchange. The softening system contains a resin tank that houses millions of tiny polystyrene beads that contain sodium ions. As hard water passes through the system, these sodium ions are exchanged with calcium and magnesium ions. The result is softened water free of scale buildup, spots, and another residue from hard minerals.
Signs That Your Pelican Water Softener Needs Maintenance
- If your water pressure is low, it may be a sign that your water softener needs attention.
- If the water doesn’t feel as soft as it used to, it may mean an issue with the salt levels in the system or a clog in the pipes.
- If water leaks from the system, it could indicate a pipe blockage or an issue with the seals.
- If you don’t hear any sound from your water softener when running, it could mean some components must be replaced.
- If you notice an unpleasant taste or smell in your water, it could mean a buildup of minerals or bacteria in the pipes.
How To Change Your Pelican Water Softener?
Changing your Pelican water softener is a relatively simple process that should not take too long. All the necessary tools are vital to ensure the process is done correctly. The following list of tools should be acquired for changing your Pelican water softener:
- Wrenches and screwdrivers
- Plastic Jumper hose
- Safety glasses
- A vacuum cleaner with attachments
Step 1: Turn off the power supply to the Pelican water softener by unplugging it from the electrical outlet.
Step 2: Remove the casing from your Pelican water softener. This is usually plastic and should come off quickly with a wrench or screwdriver.
Step 3: Disconnect the water supply lines connected to the Pelican water softener, ensuring you have the correct size wrenches.
Step 4: Once the water lines have been disconnected, use the vacuum cleaner attachments to clean any debris or sediment from your Pelican water softener.
Step 5: Connect the new plastic jump hose to your Pelican water softener’s inlet and outlet ports. Make sure to connect them securely before proceeding.
Step 6: Reconnect the water supply lines to the Pelican water softener and secure them with the right size wrenches.
Step 7: Plug your Pelican water softener into an electrical outlet and turn on the power switch.
Water leaking at the top of the tank around the head: Check the pressure switch, as this indicates that the pressure switch is failing and must be replaced. If it’s not leaking from the head, you may need to replace washers or gaskets around valves and fittings.
The tank leans to one side or is not level: If the tank is not level, lift the tank straight up 6 inches. Now tap it on the ground vertically.
The Brine Tank has too much water or is not filling correctly: Tighten all fittings along the brine line, on both ends, and in the Brine Tank itself. Check for possible kinking or clogging of the line if none of these resolves the issue.
The system is backwashing, but it is not using any salt: You will need to shake the brine tank until the block of salt breaks apart.
How do I know if my Pelican water softener needs maintenance?
If your water is not as soft as it should be or the system has been used for over two years, your Pelican water softener may need maintenance.
What should I do if my Pelican water softener fails?
If your Pelican water softener fails, it is essential to take action promptly.
- Check the system settings and ensure all valves are open and functioning correctly.
- If you need help resetting the system, consult your owner’s manual or contact a professional technician.
- If a system component needs to be replaced, such as a valve, contact Pelican directly for advice and replacement parts.
How long is a salt water softener good for?
Typically the life span of saltwater softeners is 10- 15 years.
Is it ok to run a water softener out of salt?
No, running a water softener out of salt is not recommended. It can damage the water fixtures.
The frequency of changing the pelican water softener depends on your specific needs. A general rule of thumb is to change it twice a year, but you may need to adjust this based on your usage and other factors, such as hardness levels in your local water source. It is essential to consult with an experienced plumber before changing the pelican water softener. Regular maintenance can help you get the best performance out of your system and ensure it runs efficiently.
Meet Nigel Pearson, a water filter enthusiast with a background in molecular biology. He’s all about making sure we have safe drinking water, and he’s got a bunch of interests that tie into it – think science, technology, plants, and genetics.
Imagine someone who loves learning how living things work on a tiny level – that’s Nigel. He’s studied how genes and molecules come together to make life happen. But what really caught his attention is how living things adapt to their surroundings.
Nigel didn’t stop at just learning about this stuff – he decided to use his smarts to help solve a big problem: how to get clean drinking water for everyone. He writes cool blog posts that explain tricky science things in simple words. You’ll get to read about stuff like how plants can help clean water, or how new inventions are changing the way we purify water.
But it’s not just about science and tech for Nigel. He truly cares about people and their need for safe water. Every blog post he writes shows how much he wants to make a difference. By sharing his knowledge, she wants to get more people thinking and caring about clean drinking water.