The Whirlpool WRV986FDEM01 is a side-by-side refrigerator with an in-door ice and water filtration system. The filter removes contaminants from the water before it can be dispensed and used for cooking or drinking.
How To Install A Water Filter In A Whirlpool Wrv986Fdem01?
Locate the water filter: Your Whirlpool WRV986Fdem01 refrigerator will have a water filter behind the interior’s lower right corner.
Unpack the filter: Carefully unpack the filter, keeping all components together and secure.
Remove cover from O-rings: Now remove the cover from the O-rings. This will help ensure that the new water filter fits securely in your refrigerator.
Ensure O-rings are in place: The O-rings in the water filter help create an airtight seal, which is necessary for it to work correctly. To ensure that they are in place and not broken, look at the O-rings on both the side of the filter and within the housing unit. If any O-rings appear worn or damaged, replace them with new O-rings before you begin the installation process.
Push up the compartment door: Once everything is ready, it’s time to install your water filter. Start by pushing up the compartment door on the bottom front of your refrigerator. You should be able to access this with a flat screwdriver or butter knife.
Lower the door: Next lower the door and remove the filter housing. The filter housing is located inside the refrigerator, on the right wall. It will have a cover that needs to be removed. You can do this by carefully pulling and twisting it off.
Align the arrow on the water filter label: Before installing the filter, align the arrow on its label with the arrow inside your refrigerator. This will ensure that water flows properly through the filter system.
Insert the filter into the housing: Insert it into the housing and turn it clockwise until it locks. Push the filter straight to release it from the housing, then pull it out.
Turn the filter clockwise: Next, turn the filter clockwise to ensure it is securely locked. Ensure the O-ring is seated correctly within its groove before doing this.
Lift the filter into the compartment: Once you have located the filter compartment, it is time to install the new filter. Lift the filter into the compartment until it clicks in place.
Close the filter compartment door: Once the filter has been installed, close the door on the filter compartment. You may need to apply some force to get it to latch shut and seal tight.
Flush the water: Once the new filter has been installed, flush out the water line to ensure that dirt and debris do not enter the piping system. To do this, open the cold-water tap closest to the filter and let it run until any discolored or foul-tasting water runs clear. This process should take roughly 10 minutes.
How To Set The Water Filter Status Light?
Press options on control: The display will show a “Filter Status” icon. Press the up arrow to select Filter Status.
Press options under filter: Now that you have found the filter port in your Whirlpool WRV986FDEM01, you need to press the options under the filter icon. Select “Filter Replacement” and follow the on-screen instructions to complete the installation.
Reset the filter status: You will need to reset the filter status. To do this, press and hold the Filter Reset button on your Whirlpool WRV986FDEM01 for 3 seconds. This will reset the filter indicator light, so it no longer shows a blinking red or amber indication.
Replacing the water filter in a whirlpool wrv986fdem01
Locate the water filter: The filter is located in the bottom right corner of the refrigerator compartment.
Lower the compartment door: Once you have found the water filter compartment, it is time to lower it.
Turn the water filter clockwise: Turn the old filter clockwise to remove it from the filter housing.
Clean the filter housing using a towel: Use a damp cloth or towel to clear away any dirt inside the housing before installing your new water filter. Clean any excess matter around the seal at the bottom of the housing for a secure fitment.
Install the replacement filter: After cleaning the filter housing, install the new filter.
Can coffee filters be used to filter water?
Can water filters get moldy?
Yes, water filters can get moldy if not maintained properly. Improper maintenance or installation of the filter can create a damp environment that encourages mold growth. Inspecting and cleaning your water filter regularly is essential to prevent this from happening.
What happens when you do not change your water filter?
If you don’t regularly change your water filter, there can be significant consequences. A dirty water filter can cause a decrease in the flow of water and will also lead to decreased filtration performance.
Are water filters bad for faucets?
No, water filters are not bad for your faucet. They can help protect your faucet from corrosion caused by hard water and mineral buildup. The filtration process will remove these impurities before they reach the faucet, helping to extend its life. A water filter can also improve the taste and odor of your drinking water.
Where is the water filter located in the double-door whirlpool fridge?
The water filter on a double-door Whirlpool WRV986FDEM01 refrigerator is located in the upper right corner of the Fresh Food compartment. It should be covered by a grille which you can remove easily.
Do Refrigerator water filters remove lead?
Yes, most refrigerator water filters are designed to reduce lead in drinking water. However, different models may vary in their ability to filter this hazardous metal.
Installing a water filter in your Whirlpool WRV986FDEM01 refrigerator is a great way to ensure that you and your family have access to fresh, clean drinking water. Once the filter is installed, you will be able to reap the benefits of filtered water for up to 6 months before needing to replace it. Installing the filter is a straightforward process and can be done in just a few minutes.
Meet Jeffrey B Roberts, your dedicated guide into the realm of water science and technology. As a hydro biologist with an insatiable curiosity, Jeffrey’s journey has been one of unraveling the mysteries of water systems and advocating for clean, safe water for all.
With an academic background steeped in the sciences, Jeffrey’s passion lies at the crossroads of science, technology, and nature. A deep fascination with plants and genetics has not only enriched their understanding of aquatic ecosystems but has also propelled them into the world of water softening solutions.
Believing that clean water is a basic human right, Jeffrey’s writing transcends the technicalities, making the intricate world of water softening accessible to all. Through their blog, they ardently share insights, tips, and breakthroughs, empowering readers to make informed decisions about their water quality.
Beyond his role as a prolific writer, Jeffrey is a respected figure in the hydronics industry education. With years of hands-on experience, they serve as an adjunct professor, nurturing the next generation of experts at the Thaddeus Stevens College of Technology. His involvement on the Technical Advisory Board further cements their dedication to pushing the boundaries of innovation in water technology.