Installing a Coway water filter is easy and convenient to ensure that the water you drink is clean and safe. A multi-stage filtration process removes impurities from your tap water for better-tasting drinking water. Installing a Coway water filter can provide numerous health benefits and improve the taste of your drinking water.
What Is Coway Water Filter?
Coway water filters are high-quality filtration systems that provide clean, filtered drinking water for homes and businesses. The filter removes impurities from the water, freeing it from contaminants such as chlorine, sediment, lead, and other harmful particles. Coway’s patented filter technology ensures superior performance and durability. In addition to providing clean water for drinking, many Coway systems also offer features such as carbonated and mineralized water options.
Tool Needed For Installing Coway Water Filter
- Adjustable wrench
- Center punch
- Hammer
- Screwdriver
- Drill bits
- Teflon tape
- Plastic tubing cutter
How To Install Coway Water Filter Under The Sink?
Using shut-off valve lock cold water supply: Switch off the cold water supply valve before installation and make sure it is turned off.
Turn on the faucet to drain the water: To begin installing the Coway water filter, turn on your faucet to drain any remaining water in the line. This will ensure that no sediment or particles enter the filter during installation.
Disconnect the cold water supply using a wrench: Disconnect the cold water supply. To do this, you will need a wrench.
Connect the T-valve to the cold water shut-off: Connect the t valve to the cold water shut-off valve. Use a wrench or adjustable wrench to loosen the nut on top of the t-valve. Ensure you do not overtighten it, as this could lead to a leaky connection.
Reconnect the water supply hose to the top of the t valve: Connect the top of the t valve with a water supply hose. Tighten the connection with an adjustable wrench. This will ensure that the hose is properly connected to the valve.
Place Coway water filter on kitchen cabinet: Place the coway water filter on a kitchen cabinet close to the t valve. Make sure you hold the filter high enough so it will not be in contact with any water or damp surfaces.
Make a hole on the kitchen counter for tubing: Once you have determined the location for your Coway water filter, make a hole in the kitchen counter or wall to run the flexible tubing. Use a drill bit slightly larger than the diameter of the tubing, and be sure to wear safety goggles while drilling.
Connect the tubing with the coway water filter: Connect the tubing with the coway water filter. Start by attaching one end of the red tube to the outlet of the filter cartridge and secure it using the provided clip from Coway. Then, attach the other end of the red tube to the cold water inlet valve located under your sink.
Turn on the water supply: Turn on the water supply, run the water for a few minutes, and check for any leaks.
How to install Coway water filter refrigerator tubing?
Shut off the water supply: Locate your water shut-off valve and turn it clockwise to switch off the water supply.
Cut the connecting tubing: Once you’ve connected the two parts of the coway water filter, it is important to cut the connecting tubing to the right length.
Connect tubing with T fittings: Once you have the filter casing properly installed, it’s time to attach the filter to existing water lines. Connect one piece of tubing onto the T fitting near the top of the filter casing. Make sure that this connection is secure and watertight. The other end of this tubing should be attached to a cold water line with another T fitting.
Use L fitting for connecting if needed: If you need to connect the water filter with an L fitting, ensure that all parts of the fitting are secured tightly. Start by attaching the tube to the inlet side of the L fitting. Take care not to use excessive force, as it might damage the joint and create leaks. Next, attach both sides of the L-fitting to the inlet and outlet of the filter.
Turn on the water shut-off and T valve: Turn on the shut-off valve located at the same location as the water filter.
Run the water for 3 minutes: After turning on the shut-off valve, turn on the T valve. Let the water run for approximately 3 minutes to ensure all air is removed from the lines and that water flows through properly.
How To Replace Coway Water Filter?
Close the tap water supply valve: Turn off the cold water supply valve on the wall behind the Coway water filter before replacing it.
Drain the water inside the water purifier: Drain the water from either the spout or drain hose of your unit. This is important to ensure that the water filter will work properly after installation.
Unplug the water adapter: Before you start the installation process, it is important to unplug the water adapter from its source. This ensures that no pressure will be applied to the filter during installation and will help ensure a smooth setup.
Remove the filter housing by unscrewing it: Unscrew and remove it from the filter.
Insert the new filter cartridge: Insert the new filter into the water filter. Align the arrow on top of the cartridge and insert it into the head assembly, ensuring it clicks. Rotate the cartridge until the arrows line up with the head. Once inserted, turn the head’s handle clockwise to tighten it securely and ensure that all connection points are sealed tight with the cartridge.
Screw back on the filter housing and reconnect the water adapter: Once the filter cartridge is installed, you can reattach the filter housing to the water adapter. Make sure that the o-ring is still in place and lining up correctly before doing so. Securely screw back on the filter housing until it is completely sealed.
Open the tap water supply valve to allow water to flow through the filter: The final step in the installation process is to open the tap water supply valve and allow water to flow through the filter. To do this, locate the main shut-off valve near your sink or faucet and turn it clockwise until it stops running. Once you’ve opened the valve, you can begin attaching the coway water filter according to the instructions provided.
Check for: Check for any leaks, and adjust the tightness of all connections if needed.
How to clean the faucet of the coway filter?
Turn the faucet clockwise: Place the filter head over the faucet opening and turn it clockwise until it is securely attached.
Wash the separated faucet: Now wash the separated faucet with warm water. Use a soft cloth and mild detergent to remove dust and dirt. If the faucet is dirty, use an abrasive cleaner or scouring powder and rinse with hot water afterward.
Clean the faucet with a soft, dry cloth: Before installing your Coway Water Filter, you should clean the faucet with a soft, dry cloth. This will ensure that no dirt or debris blocks the opening of the filter and prevents water from coming in or out.
Turn the faucet counter-clockwise: To reinstall it, turn it counter-clockwise until secure in place. Make sure the faucet is installed properly.
Safety And Maintenance Tips
Do not use a damaged adapter: Ensure the adapter that connects to an inlet or faucet is not cracked, corroded, or otherwise damaged. If it is, replace it with a new one.
Replace the filter periodically: Remember to replace the filter in your Coway Water Filter every six months. This will ensure that you receive the best quality water from your filter.
Unplug the water adapter when it is not in use: When the coway water filter is not in use, it is important to remember to unplug it. This will help prevent moisture or unwanted particles from entering the adapter and damaging your filter.
Wipe the dispensing holes with a dry and clean cloth: After the installation, wipe off any remaining dust on the product or water dispenser hole with a dry and clean cloth.
Connect the filter only to the cold water supply: Only connect the filter to the cold water supply line. Warm water can damage the filter.
Before installing, ensure the water pressure is proper: The water pressure should be between 0.1 and 8.0 bars.
Troubleshooting
The water tastes weird: If the taste does not change after a few days, it may be due to the water filter being soiled or contaminated. Clean or replace the filter as necessary.
The water doesn’t come: If it doesn’t come out of your Coway water filter even after you’ve installed it, you can try a few things to get it running again. Ensure that all connections are secure and the pipes are connected properly. If the connections are loose or not correctly fitted, water flow from the filter may be prevented. If that doesn’t work, check to see if the filter’s water tank is empty or close to being empty. If it is, refill it and wait a few minutes to see if that solves the issue.
The water is flowing slower: If your water is flowing slower than usual, it could be because of a clogged filter in your Coway Water Filter. To fix this problem, you will need to replace the filter.
FAQs
Does it filter out the calcium?
Yes, a coway water filter can remove up to 99% calcium from your drinking water. It also filters out bacteria, chlorine, and other impurities for a great-tasting drink with every use.
I used the coway filter less than 1 gallon per day. Do I need to change it every six months?
Changing the coway filter every six months is recommended even if you use it less than 1 gallon daily. This will help ensure your water is clean and fresh tasting.
Will coway water filter arsenic from the water?
Yes, a coway water filter can remove up to 99% of arsenic from your drinking water. Arsenic is commonly found in ground and surface water, so a filter like coway can help reduce your and your family’s exposure to this dangerous element.
Do you receive any alerts to change the filter?
Yes, the coway water filter has an integrated timer reminding you when it’s time to change the filter. The timer can be reset as needed and will alert you every six months when it’s time for a new filter.
Can I install a coway water filter under the sink?
Yes, you can install the Coway water filter under the sink. However, you must make sure that there is enough room in the cabinet to fit it properly.
Conclusion
Installing a Coway water filter is an easy process that can greatly improve the taste and safety of your drinking water. With a few simple steps, you can have clean, purified water in no time. It is important to follow the instructions for your specific model carefully and regularly maintain your filter to continue to work effectively. Investing in a Coway water filter gives you peace of mind knowing that you and your family are drinking high-quality filtered water.
Meet Jeffrey B Roberts, your dedicated guide into the realm of water science and technology. As a hydro biologist with an insatiable curiosity, Jeffrey’s journey has been one of unraveling the mysteries of water systems and advocating for clean, safe water for all.
With an academic background steeped in the sciences, Jeffrey’s passion lies at the crossroads of science, technology, and nature. A deep fascination with plants and genetics has not only enriched their understanding of aquatic ecosystems but has also propelled them into the world of water softening solutions.
Believing that clean water is a basic human right, Jeffrey’s writing transcends the technicalities, making the intricate world of water softening accessible to all. Through their blog, they ardently share insights, tips, and breakthroughs, empowering readers to make informed decisions about their water quality.
Beyond his role as a prolific writer, Jeffrey is a respected figure in the hydronics industry education. With years of hands-on experience, they serve as an adjunct professor, nurturing the next generation of experts at the Thaddeus Stevens College of Technology. His involvement on the Technical Advisory Board further cements their dedication to pushing the boundaries of innovation in water technology.