How To Install Omnipure Water Filter?

An omnipure water filter
An Omnipure water filter

An omnipure water filter is a type of water filtration system designed to reduce contaminants in your drinking water. The filter contains activated carbon and other forms of media that trap particles as small as 0.5 microns, reducing chlorine taste and odor, lead, dissolved solids, sediment, and more from your drinking water. Omnipure water filters come in various sizes, styles, and configurations to suit various applications. They are easy to install, maintain and replace, making them an excellent option for residential use.

Things Required For Installation

Things Required For Installation
Things Required For Installation
  • Drill
  • Safety glasses
  • Teflon tap
  • Plastic screws
  • wrench
  • Tubes
  • Tank
  • Faucet

Installing Omnipure Water Filter

Clean the filter housings: Before installing the Omnipure filter, clean the filter housings with warm water and mild detergent. Pay close attention to removing any dirt or debris accumulated in the housing over time.

Drill a hole through a base metal: Use a drill to drill through the base metal of your home or office where you want to install the filter. Ensure the hole is large enough for the filter housing to fit correctly.

Mount the sink-top faucet in the hole: Place the sink-top faucet in the hole that you have drilled and use a screwdriver to secure it firmly. Ensure the faucet is at an angle to properly drain water out of the filter housing.

Tighten the hole with a wrench: Use a wrench to tighten it and ensure it is adequately secured.

Place storage tank in a convenient position: Once the faucet is in place, place the storage tank conveniently for storing the filtered water. Make sure that it does not obstruct any plumbing or other lines.

Connect tubes with the tank: Use a hose to connect them to the tank and ensure they are securely fastened. Make sure that there is an adequate flow of water through the tubes.

Turn on the water supply: After the installation is complete, turn on the water supply and test the water flow through the filter. Ensure there are no clogs or blockages in the system and that the water is flowing correctly.

Check for leaks: Finally, check for any leaks in the system. If you find any leaks, fix them immediately before using the filter.

Flush the water for 15 minutes: Flush the water for 15 minutes to eliminate any dirt or debris that may have gotten into the system. This will ensure that your filtered water is clean and safe to drink.

Empty the tank: Once the flushing is done, empty it and fill it with fresh water. This will ensure that your filtered water tastes great and is safe for consumption.

Allow it to refill: Allow the tank to refill, and then check the filter for any blockages or clogs. If everything is in order, you can use the Omnipure filter to enjoy clean, safe drinking water.

Stages of Omnipure water filter

Stage 1 Sediment Pre-Filtration:  This stage comes first as it removes dirt, rust particles, and other debris from the water. The filter should be changed every 6-12 months, depending on water clarity.

Stage 2 Chlorine Pre-Filtration: This stage removes chlorine from the water. The filter should be changed every six months.

Stage 3 Ultrafine Filmtec Tfc Membrane:  This stage is where reverse osmosis occurs. It filters out small particles such as bacteria, viruses, and other particles from the water. The filter should be changed every 12 to 18 months.

Stage 4 Carbon Polishing Post Filter:  This stage removes any residuals or impurities that may remain after reverse osmosis. The filter should be changed every six months.

Cartridge Replacement

Sediment pre-filter
Sediment Pre-filter

Sediment Pre-filter: Replace the sediment pre-filter every 12 months or when you notice a decrease in water flow.

Carbon pre-filter
Carbon Pre-filter

Carbon Pre-filter: Change the cartridge of the pre-filter after one year of use or every 2000 gallons.

TRC RO Membrane
TRC RO Membrane

TRC RO Membrane: Replace the TRC RO membrane cartridge after 3-5 years.

Carbon Post filter
Carbon Post filter

Carbon Post filter: Replace the carbon post filter after use for 12 months.


Noisy drain or faucet: If you hear a loud noise coming from your faucet, it could be due to air trapped in the line. To get rid of the air, turn off the shutoff valve and open the faucet slowly until all the air is released and water begins to flow normally. If this doesn’t solve the problem, you may need to replace the filter cartridge.

Filter housing sump leaks: If the filter housing sump leaks, you will need to replace it.

Hole on faucet is leaking: If you notice the hole on your faucet, it’s likely time to install a new Omnipure water filter.

Water does not taste or smell right: This Could Signify something is wrong with your water filter. Installing an Omnipure water filter can help improve your drinking water quality.

The system is continually running: If the filter is installed correctly, the system should run continuously. When replacing the filter, observe the instructions and follow the necessary steps for disposing of the old filter.


What are the types of Omnipure water filters?

What are the types of Omnipure water filters
Types of Omnipure water filters

Several Omnipure water filters are available, including inline, under-sink, and whole-house systems. The type of filter you choose will depend on your particular needs and the size of the space where it will be installed.

Is Omnipure refrigerator water filter worth it?

Yes, the Omnipure refrigerator water filter is worth it. Not only do they provide clean, delicious-tasting filtered water for your family, but they also last longer than other types of filters and can reduce the amount of sediment in your drinking water.

Can I install the water filter cartridge myself?

Yes, you can if you have the necessary tools and skills. Installing an Omnipure Water Filter Cartridge is relatively easy, but it’s essential to follow the instructions provided by your filter manufacturer carefully.

Will it also filter carbon from water?

Yes, an Omnipure water filter will filter carbon from your water. This is achieved through the use of a K-Series carbon block filter. The carbon block technology traps contaminants such as chlorine and other organic chemicals in the porous structure of its media.

How long does a new water filter last?

A new Omnipure water filter can last up to 5 years if stored properly. It is essential to store it away from direct sunlight, high temperatures, and humidity to ensure its peak performance.


After installing an omnipure water filter, you can enjoy clear, fresh-tasting drinking water without worrying about contaminants. Changing the filter is easy and doesn’t require special tools – follow the installation instructions carefully to ensure it’s done correctly. Your Omnipure water filter can provide years of reliable service with proper maintenance and regular filter changes.

Leave a Comment