The Aquaboon Water Filter Purification Faucet is a revolutionary device that helps provide clean, safe drinking water for you and your family. Removing contaminants from the water supply, including rust, sediment, dirt, lead, and other impurities, ensures that your tap water remains clean and healthy.
Installing the Aquaboon water filter purification faucet is a quick and easy process. It will take no more than 10 minutes of your time to get it up and to run. The installation requires minimal tools and no special skills, but ensure that you have all the necessary materials available before starting.
How To Install The Aquaboon Water Filter Purification Faucet?
Mount the faucet: Mount the faucet to install the water filter.
Lock washer: Secure the lock washer onto the faucet by hand. Tighten it with pliers to ensure a good seal. It is important not to over-tighten the lock washer, as this can cause damage to the threads on the faucet.
Lock plastic washer: Take the plastic washer from the Aquaboon filter kit and slide it over the metal water hose that comes out of the underside of your sink. Use a pair of locking pliers to lock the washer in place by tightening it securely.
Fix the faucet firmly: Firmly fix the Aquaboon water filter purification faucet in its place. To do this, you should take the fixture mounting nut with your kit and thread it onto the mounting hole on the underside of your sink. Once secure, carefully screw the Aquaboon faucet into the mounting nut, and make sure that the fixture is securely in place.
Take the blue tube: Take the blue tube included in the product and connect one end to the diverter valve. Make sure that it is firmly attached before proceeding. Then, attach the other end of this tube to the water filter purifier faucet.
Put on compression nut: Once the filter housing is in place, install the compression nut. This piece fits over the top of the filter assembly and will secure it tightly to the sink faucet. To do this, align the threads on the compression nut with those on the filter housing and turn clockwise until it is securely tightened.
Put ferrule: Once you have put the faucet on the sink deck, install the ferrule. This is a metal ring that helps secure the water filter in place. Start by adding a few drops of plumber’s grease or Teflon tape around the threads on your faucet. Insert this ferrule into the faucet and tighten it. Once secure, you can attach the filter to the faucet by tightening it by hand.
Push the blue tube into the bottom of the faucet shank: Next, push the blue tube of your Aquaboon water filter purification faucet into the bottom of the faucet shank. Make sure that the tube is firmly in place. Use a wrench to tighten the fitting if necessary. You should also make sure that there are no air gaps or leaks.
Make sure compression nuts are in joint: After connecting the filter and the water line, ensure that the compression nuts are securely in place. The compression nut forms a tight seal between the filter housing and the water supply pipe.
Screw compression nut: Start by attaching the washer provided and then threading the plastic nut onto the filter faucet, turning it clockwise until it is tight. The threads on the nut should fit securely with those on the faucet and create a watertight seal.
Close the faucet: Once you have installed the Aquaboon water filter purification faucet, it is essential to make sure that all connections are tight and secure. To do this, close the faucet completely before testing for leaks.
Check for leaks: Make sure you have all the parts needed to install and that there are no leaks in any of them. Start by attaching the diverter valve to the main water line, then connect the outlet from the diverter valve to one end of the stainless steel filter hoses. To ensure a tight fit, tighten each connection with an adjustable wrench.
How To Replace The Aquaboon Water Filter Purification Faucet?
1. Shut off the water supply and the hot and cold handles on the existing faucet.
2. Unscrew the center nut that connects to the existing faucet from underneath using a pair of pliers or adjustable wrenches.
3. Pull out the faucet from its base and discard it.
4. Take the new Aquaboon water filter purification faucet out of its package and attach it to the existing water supply lines using mounting nuts and washers.
5. Secure the new Aquaboon faucet with a nut from underneath, then tighten it with an adjustable wrench or pliers.
6. Place a flexible water supply hose in the new faucet and screw it on to attach the hose.
7. Turn on the water supply in your home, then turn on the hot and cold handles of your new Aquaboon water filter purification faucet.
FAQs
What adapter is necessary to attach a standard 3/8 supply line to it?
The Aquaboon water filter purification faucet has a pre-installed 1/4″ adapter, and it is unnecessary to attach a standard 3/8 supply line. However, purchase an additional 3/8 “-1/4” compression fitting adapter if you wish to do so.
When should water filters be replaced?
It is essential to replace your water filter regularly to ensure that you and your family have access to clean, healthy drinking water. Generally, water filters should be replaced every six months or once the flow rate of your filtered water slows down significantly.
Is it possible to put a water filter on a pull-down water faucet in the kitchen?
Yes, installing a water filter in a pull-down kitchen faucet is possible. The Aquaboon water filter purification faucet is designed for easy installation. It can be attached to any standard threaded hose – whether you have a pull-down or regular kitchen faucet.
What are the best faucet water filters?
The best faucet water filters for purification use a multi-stage filtration system. The Aquaboon Water Filter Purification Faucet is one such filter, as it has a five-stage filtration system that effectively reduces harmful contaminants from your tap water. This includes chlorine, lead, rust, and other sediment-related particles.
What kind of drinking water filter should be used with a pull-down water faucet in the kitchen?
When looking for a drinking water filter to be used with a pull-down water faucet in the kitchen, the Aquaboon Water Filter Purification Faucet is an ideal option. This high-quality filtration system will provide your family safe and clean drinking water.
Why do we use charcoal to filter water?
Charcoal is a common filtering material used in water filters because of its porous surface and adsorption power. It has tiny cavities that trap impurities like dirt, bacteria, and chemicals while allowing the filtered water to pass through.
Can I hook an under-sink water filter to a sprayer outlet on a faucet?
Yes, you can. To install an Aquaboon water filter purification faucet using a sprayer outlet, you must purchase the necessary adaptors and parts as required by your installation. These may include additional hose length, flexible hoses that fit onto your existing faucet sprayers, or other plumbing accessories.
Conclusion
Installing the Aquaboon water filter purification faucet is an easy and effective way to improve your household’s water quality. With its simple step-by-step instructions, anyone can easily and quickly install this powerful water filtration system in their home or office. You now have access to great-tasting, clean drinking water with the assurance that your family is safe from potential contaminants.
Meet Jeffrey B Roberts, your dedicated guide into the realm of water science and technology. As a hydro biologist with an insatiable curiosity, Jeffrey’s journey has been one of unraveling the mysteries of water systems and advocating for clean, safe water for all.
With an academic background steeped in the sciences, Jeffrey’s passion lies at the crossroads of science, technology, and nature. A deep fascination with plants and genetics has not only enriched their understanding of aquatic ecosystems but has also propelled them into the world of water softening solutions.
Believing that clean water is a basic human right, Jeffrey’s writing transcends the technicalities, making the intricate world of water softening accessible to all. Through their blog, they ardently share insights, tips, and breakthroughs, empowering readers to make informed decisions about their water quality.
Beyond his role as a prolific writer, Jeffrey is a respected figure in the hydronics industry education. With years of hands-on experience, they serve as an adjunct professor, nurturing the next generation of experts at the Thaddeus Stevens College of Technology. His involvement on the Technical Advisory Board further cements their dedication to pushing the boundaries of innovation in water technology.