How To Reset PUR Water Pitcher Filter Light?

Last Updated on September 8, 2023 by Fahadshoaib

It is important to reset the PUR water pitcher filter light after changing the filter. To do this, you will need a cup of water and the pitcher itself.

First, fill the reservoir tank with one cup of cold tap water. Next, place the full tank on top of the pitcher and twist it clockwise until it locks into place. Lift the handle to open the lid and then fill it with one cup of cold tap water. Close the lid and twist the tank counterclockwise until it unlocks and can be removed.

Finally, hold the filter in place and press down on the reset button for three seconds. The light will flash indicating that your new filter is activated. Now you can enjoy fresh and clean water every time!

If the filter light does not reset after following these steps, please contact PUR customer service for further assistance.

How To Reset PUR Water Pitcher Filter Light? Intro

How To Reset PUR Water Pitcher Filter Light Intro
Reset PUR Water Pitcher Filter

For those of you who own a PUR water pitcher, you may have experienced the filter light turning on. The filter light is there to let you know that it’s time to replace your water filter. Once the light turns on, it will stay lit until you reset it. Resetting the filter light can be easily done in only a few steps.

What The Pur Water Filter Light Is?

What The Pur Water Filter Light Is
Pur Water Filter Light

The PUR water filter light is there to remind you that the current filter needs to be replaced. It will turn on once the filter has reached its maximum life and should be changed so that it can continue filtering impurities from your drinking water. This is an important step in ensuring that you are drinking clean, safe water.

How To Reset The Filter Light?

  • Locate the filter light on your PUR water pitcher.
  • Press and hold the filter light for 3-5 seconds until you hear a beep sound or see a flashing blue light.
    Press and hold the filter light
    Press and hold the filter light
  • When you hear the beep or see the flashing light, release the button and the filter light should now be reset.
    When you hear the beep or see the flashing light
    When you hear the beep or see the flashing light
  • Now insert a new PUR water filter into your pitcher and you’re ready to start enjoying fresh-tasting water.

It’s important to remember that once the filter has been reset, the filter light will start blinking and beeping again when it’s time to replace your filter. To make sure you are always drinking clean water, it is recommended that you regularly check the life of your PUR water filter and replace it when necessary.

What Kinds Of PUR Water Pitcher Filters Have A Filter Light?

Most PUR systems have a filter light, though some of the older models may not. The filter light is a small indicator that lights up when the water filter needs to be replaced. It is designed to help you remember when it’s time to change the filter and keep your system running smoothly.

Reasons For PUR Water Filter Light Is Not Working

Wrong Filter Type: Ensure that you are using the correct filters for your PUR water pitcher model.

Contaminated Filters: If you have filtered water that tastes bad, it might be an indication of a contaminated filter. This is because the activated carbon and charcoal in the filters will absorb odors, particles, and other impurities.

Outdated Filters: Depending on how much water you use, your filter might need to be changed more often than the manufacturer’s recommended six months. This will ensure that the filter is working optimally and that the light is functioning properly.

The Wrong Installation: If the filter was not installed correctly, the light will not work. Make sure that the filter is inserted in the correct direction and secure it firmly.

Malfunctioning Light: In some instances, the light may malfunction due to a variety of reasons. If this is the case, you can reset the light by pressing and holding down the button for three seconds.

It’s important to keep an eye on your PUR water filter light. If it is not working properly, it can indicate that there may be a problem with the filters or with the installation. Taking the time to make sure that everything is working as it should help ensure optimal filtration and great-tasting water.

How Does The Filter Change Light Work?

The filter change light is a feature that some PUR water pitchers have. It is designed to remind you when it’s time to replace the filter. As you use your pitcher, the activated carbon and charcoal in the filter will absorb odors, particles, and other impurities from your tap water. Over time, these materials become saturated and need to be replaced. The filter change light will alert you when it’s time to replace the filters, typically every six months. When it’s time to change the filters, just press and hold down the button for three seconds to reset the light.

What Does PUR Water Pitcher Filter Light Mean?

What Does PUR Water Pitcher Filter Light Mean
PUR Water Pitcher Filter Light Mean

Green Light: The green light indicates that the filter is working effectively and your water is safe to drink.

Red Light: The red light means it’s time to replace your filters.

Flashing Red Light: If the light is flashing, there may be a problem with the filter or the installation. Make sure you have the correct type and model of filter and that it is installed correctly. If this doesn’t fix the problem, you may need to get a new filter cartridge or contact customer service for assistance.

Yellow Light: A yellow light typically indicates that the filter has been changed recently and the water is still safe to drink. Once you have used the pitcher for a few weeks, the light will go back to green.

FAQs

What To Do If The Light Does Not Reset?

If the light does not reset after you have changed the filter, it is possible that your filter has been damaged. You can check this by standing in front of a bright light and holding the filter up to it. If you see any cracks or breaks in the filter, then you will need to replace it with a new one. Otherwise, it is possible that the electrical contacts inside the filter compartment are dirty or out of position. You can attempt to clean them with a soft cloth, but if they remain stubbornly unresponsive, then you may need to contact customer service for assistance.

How Long Do PUR Filter Batteries Last?

PUR filter systems come equipped with 2 AA batteries that are designed for one year.

How Long Does A New PUR Filter Last?

A new PUR filter should last for up to 40 gallons of filtered water or approximately 2 months. It is recommended that you replace the filter every 2 months for optimal performance. Resetting the filter light after a replacement is easy; simply press and hold the button on the top of the reservoir for 3 seconds until the light stops flashing.

Conclusion

You can easily reset your PUR Water Pitcher filter light. Be sure to replace your filter before the recommended time frame for optimal filtration performance and taste. Additionally, make sure not to submerge your water pitcher in water as this will damage its electrical components. Following these simple instructions will help ensure that your PUR Water Pitcher will continue working properly for many years to come.

Leave a Comment