Using a PUR Water Filter Pitcher is an easy and convenient way to filter your drinking water. The pitcher comes with an advanced filtration system that removes up to 99% of impurities and contaminants, such as lead, chlorine, pharmaceuticals, pesticides, and more. This means you can enjoy great-tasting, safe drinking water right from your kitchen counter.
To use the pitcher, simply fill it up with tap water and watch as the filter does its job. It takes about 10 minutes for the filter to remove all impurities. Once complete, you can enjoy clean, filtered drinking water from the spout at any time.
What Is A Pur Water Filter Pitcher?
A PUR Water Filter Pitcher is a pitcher that allows you to filter impurities from tap water. It uses Multi-Stage filtration technology, which helps reduce contaminants like lead, mercury, pesticides, and more. The pitcher also removes unpleasant odors and chlorine taste from the water. This makes the filtered water much tastier than regular tap water.
How Do You Use A Pur Water Filter Pitcher?
Purchase A PUR Water Filter Pitcher: Before you can start using your filter pitcher, you need to purchase one. Different pitchers come with different filtration capabilities and prices, so make sure to choose the one that fits your needs and budget.
Unpack And Rinse: Once you have your pitcher, it’s important to rinse it before first use. This will help remove any residue left over from manufacturing.
Soak The New Filter: After you’ve rinsed the pitcher, it’s time to soak the new filter. Put your filter into a bowl filled with tap water and leave it for 15 minutes. Make sure that the water level stays above the filter. Rinse the filter for 10 seconds when it’s done soaking.
Place Filter In Pour Tray: When your filter is ready, insert it into the pour tray of the pitcher. Push the filter cartridge down, and rotate it clockwise until it clicks into place. Place the pour tray into the pitcher. Cover the pitcher with the lid and make sure it’s tightly sealed.
Activate The Filter Gauge: Push the button on top of the pitcher for 5 seconds to activate the filter gauge. This gauge will let you know when it’s time to replace the filter cartridge.
Fill The Pitcher: Fill it with tap water and wait for the filtration process to finish. Let it sit for a few minutes so that all of the impurities can be filtered out.
Enjoy Your Filtered Water: Your water is now ready to be consumed. Enjoy the improved taste and purity of your filtered water.
Using a PUR Water Filter Pitcher is easy and straightforward. All you have to do is fill the pitcher with water, wait for it to filter through the filtration system, and then enjoy your freshly filtered water. The entire process typically takes minutes and can be done with little effort.
To get the most out of your PUR Water Filter Pitcher, make sure to replace the filter every two months or 40 gallons (whichever comes first). This will ensure that your water stays clean and free of impurities.
The Benefits Of Using A Pur Water Filter Pitcher
- Removes impurities like lead, mercury, pesticides, and more from tap water
- Reduces unpleasant odors and chlorine taste for improved flavor
- Easy to use and requires little effort
- The quick filtration process takes mere minutes
- Replace the filter every two months or 40 gallons (whichever comes first) for optimal performance
- A cost-effective and environmentally friendly alternative to buying bottled water
Cleaning And Maintenance
- To clean your PUR Water Filter Pitcher, first, remove the filter cartridge and pour the tray from the pitcher.
- Rinse the pieces with lukewarm water to remove any dirt or dust that may have accumulated on them.
- Use a soft sponge and non-abrasive detergent to gently scrub
What Do I Do If The Light On My Pitcher Is Out?
What If The Green Light On My Pitcher Isn’T Flashing After I Pour?
What Do I Do If The Lid Is Falling Off My Pitcher When Pouring?
Can I Pour Water Out Of The Pitcher If There Is Water Still In The Pour Tray?
shouldn’t be used with water warmer than 82°F (28°C).
Do I Use Hot Water In Pur Water Filter Pitcher?
No. It is best to use cold water because the filter will work more quickly and effectively in cooler temperatures. Using hot water can cause the pitcher to become damaged over time and may also reduce the life expectancy of your filter. It is also important to note that PUR Water Filter Pitchers shouldn’t be used with water warmer than 82°F (28°C). Additionally, boiling water may remove some minerals, and can also damage the filter. Therefore, it is important to always use cold water when using a PUR Water Filter Pitcher.
What If The Not Installed PUR Water Filter Pitcher Is Correct?
If the PUR Water Filter Pitcher is not installed correctly, it can cause leaking and water to bypass the filter.
To Avoid This Issue
- Make sure that the lid on your pitcher is securely fastened and that there are no cracks or breaks in it.
- Check that the filter unit is properly inserted and locked into place.
- Check the O-ring for any cracks or damages and ensure that it is sealed properly.
- If you notice leaking, try taking the filter out and reinserting it until it locks securely in place. If this does not work, then you may need to purchase a new filter or replace the O-ring.
How To Store PUR Water Filter Pitcher?
When not in use, it is best to keep your PUR Water Filter Pitcher stored in a cool, dry place. Storing it in an area that receives direct sunlight or near heat sources can cause the filter to degrade more quickly and reduce its lifespan. Additionally, make sure that the lid is securely fastened and the filter unit is removed and stored in a cool, dry place away from direct sunlight. This will help to preserve the effectiveness of your filter for longer. Ultimately, using a PUR Water Filter Pitcher is an easy way to get clean and great-tasting drinking water right at home. Following these guidelines will ensure that it lasts and continues to provide your family with fresh, filtered water.
How Does The Water Filter Replacement Indicator Work?
The PUR water filter pitcher is equipped with a built-in indicator that helps you keep track of when the water filter needs to be replaced. When your water filter reaches its maximum capacity, it will begin flashing red light and a message on the LCD display will appear indicating it’s time to replace the filter.
How Often Should I Change The Filter?
To get the best performance from your PUR Water Filter Pitcher, you should change the filter every 40 gallons or two months, whichever comes first. This ensures that your water tastes great and is free from impurities like chlorine, lead, and other contaminants.
You should also replace the filter after a power outage or if you notice your water is not tasting as fresh as usual.
How Long Should A PUR Water Filter Last Per Gallon?
The PUR Water Filter Pitcher is designed to be able to filter up to 40 gallons of water before it needs to be replaced. This means that it can filter approximately one gallon of water per day and should last up to two months.
What Is The pH Of Water Pur Filters?
The pH of water filtered by the PUR Water Filter Pitcher should be between 5.5 and 7.5, which is generally considered to be within the optimal range for drinking water.
Does Water From A PUR Filter Taste Better?
Yes. Water filtered by the PUR Water Filter Pitcher will taste much better than tap water as it is free from chlorine and other impurities that can give tap water an unpleasant flavor.
Do Water PUR Filters Remove Microplastics?
Yes. The Pur Plus filters are designed to remove particles as small as 0.5 microns, including microplastics. This ensures that your drinking water is free from a variety of contaminants, so you can be sure it is safe to drink.
What Type Of Contaminants Does The Pur Water Filter Remove?
- Pesticides And Herbicides
- Pharmaceuticals And Hormones
Using a PUR Water Filter Pitcher is an easy and convenient way to improve the taste of your tap water while reducing harmful impurities. Make sure to replace the filter regularly to get the most out of your pitcher. Enjoy refreshingly clean, flavorful water with every sip!
Meet Nigel Pearson, a water filter enthusiast with a background in molecular biology. He’s all about making sure we have safe drinking water, and he’s got a bunch of interests that tie into it – think science, technology, plants, and genetics.
Imagine someone who loves learning how living things work on a tiny level – that’s Nigel. He’s studied how genes and molecules come together to make life happen. But what really caught his attention is how living things adapt to their surroundings.
Nigel didn’t stop at just learning about this stuff – he decided to use his smarts to help solve a big problem: how to get clean drinking water for everyone. He writes cool blog posts that explain tricky science things in simple words. You’ll get to read about stuff like how plants can help clean water, or how new inventions are changing the way we purify water.
But it’s not just about science and tech for Nigel. He truly cares about people and their need for safe water. Every blog post he writes shows how much he wants to make a difference. By sharing his knowledge, she wants to get more people thinking and caring about clean drinking water.