What Salt To Use In GE/Whirlpool Water Softener?

When it comes to softening your water, salt is a vital component in the process. The type of salt you use in your GE/Whirlpool water softener can have a huge impact on its performance and efficiency. Use Pellet, Nugget, (large crystal) Solar salt, or Potassium chloride (KCl) in a GE/Whirlpool water softener. Make sure that the salt is 99.5 % pure.

Why Is Salt Important For Water Softeners?

Why Is Salt Important For Water Softeners
Salt Important For Water Softeners

Salt is an essential part of the water-softening process. The salt helps to remove minerals such as calcium and magnesium, which are responsible for hard water. When these minerals are removed from hard water, it makes showering, laundry, and other household chores easier and more efficient. Salt also helps to prevent scale buildup in pipes and plumbing fixtures, which can clog and damage them over time. The type of salt you use in your GE/Whirlpool water softener will depend on the model and manufacturer’s instructions.

What Salt To Use In GE/Whirlpool Water Softener?

  • Pellet Salt: The GE and Whirlpool water softener systems are designed to work with pellet salt. Pellet salt is very clean and easily available. It is little bit expensive than Solar Crystal Salt.
    Pellet Salt
    Pellet Salt
  • Solar Crystal Salt: Solar crystal salt is also used in GE/Whirlpool Water Softener systems. It is very pure than any other type of salt, so it helps to reduce mineral buildup and help soft water systems run effectively. It also does not contain additives or bleaching agents that can cause damage to the system over time. Solar Salt is available in either granular form or pellets and should be stored in a dry place away from moisture.
    Solar Crystal Salt
    Solar Crystal Salt
  • Potassium chloride (KCl): KCl is the most widely used type of salt in water softeners, and it produces a slightly salty taste in softened water. It is an effective alternative to rock salt, and it is generally more affordable. However, some people may prefer not to use potassium chloride due to environmental concerns since the runoff from KCl can be toxic to aquatic life.
    Potassium chloride (KCl)
    Potassium chloride (KCl)
  • Evaporated Salt: Evaporated salt is the most common type of salt used in GE/Whirlpool water softeners. It is usually a combination of sodium chloride and magnesium chloride, with varying amounts of each depending on the brand and type of salt purchased. Although evaporated salt can be used in GE/Whirlpool water softeners, it should not be used if the system has a potassium chloride (KCl) resin bed because it would not adequately regenerate it.
    Evaporated Salt
    Evaporated Salt
  • Rock Salt: Rock salt is the most affordable and commonly used type of salt for water softeners. It’s harvested from ancient sea beds, typically in the form of evaporated salt brine. This type of salt tends to contain a small amount of insoluble matter that can build up over time and reduce the efficiency of your system. As such, it is recommended that you occasionally flush the softener with a solution of citric acid and water to avoid this buildup.
    Rock Salt
    Rock Salt
  • Block Salt: Block Salt is often the preferred type of salt for use in a GE/Whirlpool Water Softener. Block Salt is made from evaporated sea water and is available in small cube-shaped blocks with an approximate diameter of 4 inches (10 cm). The cubes have a chalky texture and are slightly damp to the touch. Block Salt has low levels of dust and other impurities, making it easy to use in the water softener. Block Salt should be placed directly into the brine tank to ensure maximum efficiency and effectiveness.
    Block Salt
    Block Salt

How To Choose The Right Salt For Your GE/Whirlpool Water Softener?

  • How hard your water is: the degree of hardness will determine what type of salt is best for your water softener. If you have hard water, you may need to use a salt with a higher purity level. The harder the water, the higher the purity level recommended by GE/Whirlpool.
  • What are your needs: Different types of salts offer different benefits such as reduced cloudiness or improved taste. It’s important to select the type of salt that meets your needs.
  • The size and type of water softener system: will determine what type of salt to use in a GE/Whirlpool water softener. Generally, the most common types of salts used are 3-in-1 Salt (which is chemically treated to prevent bridging and mushing) or Solar Salt (rock salt from evaporated sea water).

How To Add Salt In Water Softener?

Start by filling the salt tank
Start by filling the salt tank

1. Start by filling the salt tank of your GE/Whirlpool Water Softener with the right type of salt for your system. Start by checking the manufacturer’s manual to make sure you’re using the correct type.

2. Make sure that you are cleaning a minimum of 1 pound per square foot in order to get efficient softening.

3. Use the scoop provided in the manual to measure out the right amount of salt per square foot and add it to your tank.

4. Once you have added enough salt, turn on the water softener and leave it running until the water runs clear before adding any more salt.

5. Repeat this process every 6 months or as suggested by the manufacturer’s manual to ensure your water softener is running efficiently.

6. After adding salt, make sure to check the water hardness level with a test strip and adjust if necessary. This will help ensure that your GE/Whirlpool Water Softener is giving you the best performance possible.

7. remember to always keep your salt tank topped up and the brine tank clean and free of any build-up or debris. This helps ensure the best performance from your water softener system.

Are Some Salts Better Than Others For A GE/Whirlpool Water Softener?

Are Some Salts Better Than Others For A GE Whirlpool Water Softener
Salts Better For A GE Whirlpool Water Softener

When it comes to water softening, the type of salt used is a crucial factor. Although any type of salt can be used in a GE/Whirlpool water softener, some salts are better than others when it comes to efficiency and overall performance. The best types of salt for a GE/Whirlpool water softener include solar salt, evaporated salt and potassium chloride.

  • Solar salt is a type of rock salt that is produced from evaporated sea water or brine. It contains small amounts of other minerals, such as magnesium and calcium, which can help to improve the water’s quality. Solar salt also does not contain any additives, making it one of the purest types of salt available.
  • Evaporated salt is a type of rock salt that has been subjected to high temperatures before being processed into crystals. It is also free from additives and impurities, making it an ideal choice for water softening.

When Should I Use Pellet Salt In My GE/Whirlpool Water Softener?

Pellet salt is use when you want to achieve a higher amount of regeneration, as it is more concentrated than other types of salt. The pellets are also less corrosive on your GE/Whirlpool water softener and will help reduce the build-up of scale in the system. It is recommended that you use pellet salt if your water hardness level is greater than 10 grains per gallon. The higher the hardness level, the more salt you will need to achieve effective softening. Pellet salt is also a good choice if your water has a high iron content as it helps to reduce iron build-up in the softener. When using pellet salt, be sure to use only food grade quality pellets that are specifically designed for water softeners.

Should I Use Salt With Iron Removal Additives In My GE/Whirlpool Water Softener?

When deciding what type of salt to use in your GE/Whirlpool water softener, you should consider the level of iron present in your water. If there is high levels of iron present, using a salt blend with an iron removal additive may be beneficial. Iron removal additives act to help reduce the amount of iron that enters your home’s water supply.

Are Salts With Cleaning Additives Good For My GE/Whirlpool Water Softener?

It is generally not needed or recommended to use salts with cleaning additives for GE/Whirlpool water softeners. While the additives may help remove iron and other contaminants from your water, they also shorten the lifespan of the system as these particles can build up in the resin bed over time. Additionally, some additives can leave a residue on fixtures, glasses, and dishes which can be difficult to remove.

Can I Mix Salt Types In A GE/Whirlpool Water Softener?

You should not mix salt types in a GE/Whirlpool water softener. Using the wrong type of salt can cause your water softener to malfunction, resulting in costly repairs. Your GE/Whirlpool water softener is designed to operate best when filled with a premium grade salt that contains at least 99.5% pure sodium chloride and contains no artificial additives. Additionally, you should never use rock salt or solar salt in a GE/Whirlpool water softener as they contain impurities that can clog the machine and damage its components.

Which Type Of Water Softener Salt Is Best To Prevent Bridging.

for preventing bridging , many experts recommend the use of potassium chloride in a GE/Whirlpool water softener. Potassium chloride has been proven to be more efficient when it comes to preventing bridging than either sodium chloride or rock salt. It is also considered safer for the environment as it does not add any additional contaminants to wastewater and is not as corrosive on the water softener’s components.

What Salts Should I NOT Use In A GE/Whirlpool Water Softener?

It is important to use the right type of salt in your water softener. Certain salts can damage or even corrode your GE/Whirlpool water softener, so it is important to avoid them altogether. The following types of salt should not be used in a GE/Whirlpool Water Softener: rock or solar salt, unprocessed sea salt, potassium chloride, and iodized table salt.

Rock or solar salt is not refined, so it contains impurities that can damage the interior components of your water softener. Unprocessed sea salt can leave a residue in the brine tank that could cause clogging and other problems within the system. Additionally, potassium chloride should not be used in a water softener as it can reduce the efficiency of the unit. Finally, iodized table salt is too fine and could clog up the internal workings of your machine.


Why is my water softener not regenerating?

This is a common problem with water softeners that use salt, such as the GE/Whirlpool brand. It could be caused by an issue with the brine tank, insufficient salt levels in the tank, or a malfunctioning timer. Check to make sure that your brine tank is properly filled and that the timer is functioning correctly. If all else fails, you may need to call a professional plumber to help diagnose the problem.


Do dishwashers need salt?

No, dishwashers do not need salt to function properly. Dishwashers contain a water softener system which does not require any extra salt in order for it to work. The water softener system uses the minerals and salts already present in the water supply to help clean your dishes effectively. The only time additional salt needs to be added is when the water supply has a low mineral content or when the softener needs to be regenerated. In either case, it is important to use the recommended type of salt specific for your brand and model of dishwasher.

Which is the best water softener for washing machines?

The answer to this question depends on the type of water that you have in your home. Generally, the best type of salt for water softeners is sodium chloride, also known as common table salt. This type of salt is widely available and very cheap compared to other types of salts used for water softening. It is important to note that some areas have water that is too hard for sodium chloride, and in these cases, other types of salts such as potassium chloride or calcium carbonate must be used instead.

How do you change the salt in the water softener?

To change the salt in your GE/Whirlpool water softener, you should first consult your owner’s manual or call a professional technician. In general, however, it is best to use either evaporated salt or solar salt. Evaporated salt contains fewer impurities than solar salt and therefore produces more effective results when used in a water softener. The amount of salt you will need to use depends on your particular softener model, so be sure to check the owner’s manual for specific instructions.

How much does a water softener salt cost?

The cost of salt for a water softener varies depending on the type of salt used, its purity level and the amount you need. Generally, the most common types of salts suitable for use in GE/Whirlpool water softeners are solar salt (also known as evaporated salt), potassium chloride, and pelletized salts. Solar salt is typically the least expensive type of salt and can cost anywhere from $2.50 to $4 per 50-pound bag. Potassium chloride usually costs between $7 and $10 per 50-pound bag, while pelletized salts are generally priced in the range of $8 to $15 for a 50-pound bag. Prices may vary depending on your location and the supplier.

Can a water softener make water taste salty?

No, a water softener does not make the water taste salty. Instead, it uses a kind of salt called sodium chloride to help remove certain minerals such as calcium and magnesium from the hard water. This process is known as ion exchange and the salt helps to attract and trap those minerals so they can be flushed away with each regeneration cycle of the water softener. GE/Whirlpool recommends a high purity solar salt in pellet form for their water softeners, as this type of salt is more efficient and less likely to cause blockages or damage than rock salt or other types.


When it comes to salt for your GE/Whirlpool water softener, use either evaporated or solar salt. You can purchase both in 10-25 lb bags from most home improvement stores. Evaporated salt is more affordable and easier to find than solar salt, but it may contain impurities that could clog up the system over time. Solar salt is more expensive, but it contains fewer impurities and produces softer water. Either way, you should check the brine tank of your GE/Whirlpool water softener once a month to make sure that it has enough salt. If not, add more as necessary.

Leave a Comment